Satellite Dish
Satellite Dish Accessories for Everyone's Needs
There are many more channels to get if you use a satellite dish instead of cable TV or a regular indoor antenna, but if you choose to assemble your own satellite dish, you will also need some accessories that can enhance your satellite experience. All the accessories you find here are of good quality and will ensure you a crystal-clear picture for the future if you assemble the right equipment.
Receiver and Screen for the Satellite Dish
The first step towards a good satellite experience is the screen and receiver. You can get many different screens in various sizes and even different colors that will match your exterior wall or roof, depending on where you plan to place the satellite dish. At the same time, you will also need a satellite receiver that enables you to receive FTA channels. FTA stands for Free-to-air, which simply means you can receive a multitude of free channels, especially in English and German. There are several different models that can offer various reception options, such as DVB-S, DVB-C, and DVB-T.
See Our Reasonable Selection of LNB
To assemble a proper satellite dish, you will naturally also need an LNB head that can receive the satellite signal and format it into something your receiver can understand and send to your television. LNB heads come in Single, Twin, Quad, and Octo, meaning that if you have an Octo LNB head, it can send the signal to 8 satellite receivers instead of just one, which can be practical if you need to distribute the signal from one satellite dish to multiple households. You can also get LNB Monoblock heads, which can receive from two different satellites at once, so you don’t have to change the position of your satellite dish if you want to switch to another satellite position that broadcasts different channels. When a satellite dish is placed on the side of the house or on the roof, it is exposed to the elements, and this can affect the LNB head's ability to receive satellite signals. If it rains, hails, or snows, and even strong gusts of wind can influence the head's receiving capability, it is a good idea to equip the satellite dish with an LNB cover that protects the LNB head. Additionally, you will naturally also need a holder that secures the LNB head onto the dish.
Switch
If you have multiple LNB heads on your satellite dish, you will need a DiSEqC switch that can toggle between the different heads. With such a switch, you can receive signals from multiple satellites on one satellite receiver. If you only have one dish, but need to distribute the signal to several receivers, you will need a multiswitch. This switch is suitable for housing associations, where people share one satellite dish. A multiswitch can be had with several different configurations.
Extender & Amplifier
If you have various devices standing out in the open, it may be beneficial to store some of them away in a cabinet, but this complicates using a remote control, as it typically cannot penetrate a cabinet door. Here, you can use an IR Extender. An IR Extender can be used by up to 5 different devices, which you can then store away without affecting the remote control's sending strength. In other words, you don't need to open the cabinet to connect to, for example, your satellite receiver. If you have long cable runs from your satellite dish to your receiver, you can benefit from a satellite amplifier, as the signal can lose strength if the cables are too long, resulting in a poorer picture and interference. You may also need an RF modulator that changes the signal from a satellite receiver, so the signal received from the dish can be displayed on your television. This means that if you connect an RF modulator between the satellite receiver and the antenna socket, all TVs in the home can view the signal from the satellite receiver.
Practical Mounts
To position your satellite dish correctly, you will also need a mount to attach the dish to the side of the house or on the roof. You can also get a stand so you can place the dish on the balcony if you live in an apartment and are not allowed to install anything on the exterior walls. Both mounts and stands come in different varieties.
Do You Need a Splitter?
If, in addition to your satellite dish, you still have a regular antenna on the roof, or cable TV in the house, you can use a SAT/TV combiner, which allows you to use both simultaneously via your antenna sockets. If you only have one satellite dish but want to use multiple satellite receivers, or if you share the signal with one or more neighbors, you will need a satellite splitter.
Other
If the signal from your satellite dish is very strong, it can cause problems with overdriving, which can affect the sending strength and distort the picture. By using a satellite attenuator, you can easily overcome that issue. If you want to gain access to more satellite positions, but your satellite dish is high up on the outer wall of your house, you may benefit from a satellite motor that can change the dish's direction via a remote control. This way, you won't have to climb a ladder every time you want to catch the signal from another satellite. To ensure your satellite dish points directly at the satellite you wish to use, it requires some finesse, and it can be difficult to find the exact right position. Therefore, a satellite finder would be a really good tool that can help you locate the satellite's correct position so that your dish points directly at it and receives the best and strongest signal. The satellite finder is placed between the LNB head and the cable, and then gives you a clear indication of whether you are hitting the satellite's position correctly.
